Encapsulated

DURUM

Info

Encapsulation of the base plate results in higher mechanical resistance and reduces moisture absorption. Galvanisation achieves a corrosion-resistant layer on the surface of the plate.

Finishes

Encapsulated AG30 - Encapsulated

Encapsulated AG30

600x600mm

  • CORE

    Wooden agglomerate 30mm thickness

  • TOP FINISH

    Galvanised sheet

  • BOTTOM FINISH

    Galvanised sheet

  • Download Technical Sheet
Encapsulated AG28 - Encapsulated

Encapsulated AG28

600x600mm

  • CORE

    Wooden agglomerate 28mm thickness

  • TOP FINISH

    Galvanised sheet

  • BOTTOM FINISH

    Galvanised sheet with structural reinforcement

  • Download Technical Sheet
Encapsulated SC28 - Encapsulated

Encapsulated SC28

600x600mm

  • CORE

    Calcium sulphate 28mm thickness

  • TOP FINISH

    Galvanised sheet

  • BOTTOM FINIS

    Galvanized sheet with structural reinforcement

  • Download Technical Sheet
Encapsulated SC28 1500 - Encapsulated

Encapsulated SC28 1500

600x600mm

  • CORE

    Calcium sulphate 28mm thickness

  • TOP FINISH

    Galvanised sheet

  • BOTTOM FINISH

    Galvanized sheet with structural reinforcement

  • Download Technical Sheet

Accessories

ITDU PEDESTALS

ITDU PEDESTALS

Ø85mm round support surface, for medium / high loads, suitable for ITPM / ITPQ / ITPH profiles. Height adjustable from 35 mm to 1010 mm.

ITDU REINFORCED PEDESTALS

ITDU REINFORCED PEDESTALS

Ø85mm round support surface, for medium / high loads, suitable for ITPM / ITPQ / ITPH profiles. Height adjustable from 35 mm to 1010 mm.

ITDU CONDUCTIVE PEDESTALS

ITDU CONDUCTIVE PEDESTALS

Ø85mm round support surface with sheet brass and support base with earthing cable, for medium / high loads, suitable for ITPM / ITPQ / ITPH profiles. Height adjustable from 35 mm to 1010 mm.

ITPM BARS

ITPM BARS

U-profile made of galvanized steel, 29 mm high and available in 0.8 mm or 1.0 mm thickness. With plug-in or screw-in function to stabilize the raised floor, for low / medium loads.

ITPQ BARS

ITPQ BARS

25x25 mm profile made of galvanized steel with a low-density polyethylene coating to reduce noise. 1.0mm screws. Its function is to strengthen and stabilize the raised floor for medium / high loads.

ITPH BARS

ITPH BARS

40x25mm profile made of zinc-plated steel with a low-density polyethylene coating to reduce noise. 1.5mm screws. Its function is to reinforce and stabilize the raised floor for heavy loads.

ANTI-VIBRATIC SUPPORTS

ANTI-VIBRATIC SUPPORTS

Anti-vibration rubber can be placed under the foot of the supports to reduce noise transmission. The rubber consists exclusively of high-quality rubbers which can dampen vibrations and, thanks to the lack of air in the physical composition of the product, offer exceptional compressive strength. The quality of the rubber from which the product is made guarantees constant elasticity over time and excellent properties in terms of impact resistance, moisture and immutability.

ADHESIVE GRUD P104

ADHESIVE GRUD P104

Specially developed for gluing supports on rough concrete substrates. Water based.

ADHESIVE BBC C04

ADHESIVE BBC C04

Quick drying contact adhesive. Ideal for gluing supports on smooth floors without irregularities.

VENTILATION GRILLE

VENTILATION GRILLE

Ventilation grille with adjustable lamellas for supply and exhaust air to the cavity in the raised floor. Available in aluminium or steel, with clip fastening or for screwing.

PERIMETER BAND

PERIMETER BAND

Tape made of polyethylene foam that is attached along the edge of the raised floor and the points of contact with the building structure in order to absorb the expansion of the floor.

SUCTION CUPS

SUCTION CUPS

Equipment for raising the raised floor to gain access to the technical infrastructure or to replace panels.

Application

ITDU SYSTEM

  1. 1.
    ITDU SYSTEM

    The system provides for the use of ITDU supports with a maximum height of 120 mm. No locking profiles are used. It is suitable for low loads and for use in low-traffic areas without high point loads.

ITDU/M SYSTEM

  1. 1.
    ITDU/M SYSTEM

    The system provides for the use of ITDU supports and ITPM profiles with a thickness of either 0.8 mm or 1 mm. It is suitable for medium-high loads.

ITDU/Q SYSTEM

  1. 1.
    ITDU/Q SYSTEM

    This system consists of the use of ITDU ref. pedestals together with 1mm thick ITPQ bolting bars. It is suitable for high loads. The system provides for the use of ITDU supports and ITPQ profiles. It is suitable for heavy loads.

ITDU/H SYSTEM

  1. 1.
    ITDU/H SYSTEM

    The system provides for the use of ITDU supports and 1.5 mm thick ITPH profiles. It is designed for very high loads.

ITDUC/M SYSTEM

  1. 1.
    ITDUC/M SYSTEM

    The system provides for the use of conductive ITDU supports with sheet brass and earthing cables on the support base as well as ITPM profiles with a thickness of 0.8 mm or 1 mm. It is suitable for a conductive system and high average loads.

Videos

DURUM Application
DURUM Application
Logo
Sending