The raised floor is a fiber-reinforced calcium sulphate panel with high mechanical strength and high density. It is a product with excellent fire resistance. It is available with the following surface coverings: aluminium, laminate, PVC, linoleum, parquet, porcelain stoneware, marble and granite.
600x600mm
Calcium sulphate 34mm thickness
Aluminium / laminate / PVC / linoleum / parquet / ceramic / marble / granite
Galvanised sheet
600x600mm
Calcium sulphate 34mm thickness
Aluminium / laminate / PVC / linoleum / parquet / ceramic / marble / granite
Aluminium
600x600mm
Calcium sulphate 30mm thickness
Aluminium / laminate / PVC / linoleum / parquet / ceramic / marble / granite
Galvanised sheet
600x600mm
Calcium sulphate 30mm thickness
Aluminium / laminate / PVC / linoleum / parquet / ceramic / marble / granite
Aluminium / PVC sheet / primary
Ø85mm round support surface, for medium / high loads, suitable for ITPM / ITPQ / ITPH profiles. Height adjustable from 35 mm to 1010 mm.
Ø85mm round support surface, for medium / high loads, suitable for ITPM / ITPQ / ITPH profiles. Height adjustable from 35 mm to 1010 mm.
Ø85mm round support surface with sheet brass and support base with earthing cable, for medium / high loads, suitable for ITPM / ITPQ / ITPH profiles. Height adjustable from 35 mm to 1010 mm.
U-profile made of galvanized steel, 29 mm high and available in 0.8 mm or 1.0 mm thickness. With plug-in or screw-in function to stabilize the raised floor, for low / medium loads.
25x25 mm profile made of galvanized steel with a low-density polyethylene coating to reduce noise. 1.0mm screws. Its function is to strengthen and stabilize the raised floor for medium / high loads.
40x25mm profile made of zinc-plated steel with a low-density polyethylene coating to reduce noise. 1.5mm screws. Its function is to reinforce and stabilize the raised floor for heavy loads.
Anti-vibration rubber can be placed under the foot of the supports to reduce noise transmission. The rubber consists exclusively of high-quality rubbers which can dampen vibrations and, thanks to the lack of air in the physical composition of the product, offer exceptional compressive strength. The quality of the rubber from which the product is made guarantees constant elasticity over time and excellent properties in terms of impact resistance, moisture and immutability.
Specially developed for gluing supports on rough concrete substrates. Water based.
Quick drying contact adhesive. Ideal for gluing supports on smooth floors without irregularities.
Ventilation grille with adjustable lamellas for supply and exhaust air to the cavity in the raised floor. Available in aluminium or steel, with clip fastening or for screwing.
Tape made of polyethylene foam that is attached along the edge of the raised floor and the points of contact with the building structure in order to absorb the expansion of the floor.
Equipment for raising the raised floor to gain access to the technical infrastructure or to replace panels.
The system provides for the use of ITDU supports with a maximum height of 120 mm. No locking profiles are used. It is suitable for low loads and for use in low-traffic areas without high point loads.
The system provides for the use of ITDU supports and ITPM profiles with a thickness of either 0.8 mm or 1 mm. It is suitable for medium-high loads.
This system consists of the use of ITDU ref. pedestals together with 1mm thick ITPQ bolting bars. It is suitable for high loads. The system provides for the use of ITDU supports and ITPQ profiles. It is suitable for heavy loads.
The system provides for the use of ITDU supports and 1.5 mm thick ITPH profiles. It is designed for very high loads.
The system provides for the use of conductive ITDU supports with sheet brass and earthing cables on the support base as well as ITPM profiles with a thickness of 0.8 mm or 1 mm. It is suitable for a conductive system and high average loads.
