Classic System

DEX

Info

Practical and comfortable solution!

The DEX ceramic tiles are made from a finely milled mixture which is shaped in moulds at high pressure, followed by a single firing and a subsequent firing at a temperature above 1200ºC according to the requirements of standard NP EN 14411: 2008 BIa. It is highly resistant to abrasion and is absolute waterproof.

DEX is structured as follows. The DEX decking board consists of an unglazed ceramic tile that is glued to a thermoplastic tub support. The adhesion is realised with a special adhesive under high pressure. In the tub support, directly below the ceramic tile, three parallel inserts made of galvanized steel run along the entire length of the tile for reinforcement. This ensures increased impact resistance and contributes to a safer use of the final DEX deck.

The technical characteristics of this product make it a totally safe, comfortable and practical solution, eliminating any maintenance with surface treatments typically used in conventional decks (of natural wood or composites).

DEX is characterised by high wear resistance, high resistance to stains and chemicals, high impact resistance, excellent fire reaction to fire and durability.

The specific configuration of the decking boards enables easy attachment to the substructure with the aid of mounting clips.

The substructure can consist of treated wooden beams or metal profiles. We recommend using height-adjustable feet to compensate for elevation, uneven floors or a slightly inclined floor.

Technical Information
- High wear resistance;
- Good resistance to stains and chemicals;
- Easy cleaning and maintenance;
- Excellent resistance to thermal excursions;
- Excellent thermal insulation;
- Long life span;
- Compensation for height differences in the terrace area or raise the deck with adjustable feet;
- Easy water drainage;
- Shielding of cables and pipes;
- Design;
- Completely waterproof;
- Excellent response to fire;
- High mechanical resistance.

Finishes

Deck Smooth Line R10 Almond - Classic System

Deck Smooth Line R10 Almond

1200x155x28mm

Deck Smooth Line R10 Chest - Classic System

Deck Smooth Line R10 Chest

1200x155x28mm

Deck Smooth Line R10 Wal - Classic System

Deck Smooth Line R10 Wal

1200x155x28mm

Deck Smooth Line R10 Hazel - Classic System

Deck Smooth Line R10 Hazel

1200x155x28mm

Striped Deck Line White - Classic System

Striped Deck Line White

1200x155x28mm

Striped Deck Line Grey - Classic System

Striped Deck Line Grey

1200x155x28mm

Striped Deck Line Jatobá - Classic System

Striped Deck Line Jatobá

1200x155x28mm

Striped Deck Line Nogueira - Classic System

Striped Deck Line Nogueira

1200x155x28mm

Accessories

DEX

DEX

Porcelain stoneware tiles glued on thermoplastic tub support with internal steel inserts to reinforce the compactness.

WOODEN BEAMS

WOODEN BEAMS

Treated wood. Dimension 1000x40x20 mm

METAL BARS

METAL BARS

Measures 40x20x1.5 mm

CLIP AND SCREWS

CLIP AND SCREWS

Accessories (fastening clips and screws).

ADHESIVE GRUD P104

ADHESIVE GRUD P104

Specially developed for gluing supports on rough concrete substrates. Water based.

ADJUSTABLE PEDESTAL

ADJUSTABLE PEDESTAL

Regulation: 35 to 55mm
Consumption: 3.33 pedestals per m²
Ref: 1181
EAN Code: 3 443 440 011 811

Provides the ability to regulate the height of the deck.

Application

INTRODUCTION

  1. 1.
    INTRODUCTION

    Installation on a simple wooden beams structure

  2. 2.
    INTRODUCTION

    Installation on a simple galvanized steel bar structure

  3. 3.
    INTRODUCTION

    Installation on a simple wooden beams structure with height adjustable pedestals

  4. 4.
    INTRODUCTION

    Installation on a simple galvanized steel bar structure with height adjustable pedestals

  5. 5.
    INTRODUCTION

    Detail of joint (longitudinal)

  6. 6.
    INTRODUCTION

    Detail of connection between parts

CLASSIC SYSTEM

  1. 1.
    CLASSIC SYSTEM

    Starting with the first row, fasten the DEX boards to the selected substructure using the fastening clips.

  2. 2.
    CLASSIC SYSTEM

    Fasten the first metal bars by gluing them to the existing floor. As an option you can screw them to the floor.

  3. 3.
    CLASSIC SYSTEM

    Screw the starter clip onto the structure beams. To do this, you have to cut the regular clip in half accordingly.

  4. 4.
    CLASSIC SYSTEM

    Begin mounting DEX.

  5. 5.
    CLASSIC SYSTEM

    Starting with the first row, fasten the DEX boards to the selected substructure using the fastening clips.

Videos

DEX Collection
DEX Collection
Logo
Sending